Product ID:ILUX EPY SURF & FAIR COMP A, 417A
MSDS Date:01/07/1994
FSC:8010
NIIN:00N068999
Kit Part:Y
MSDS Number: CCBTN

COURTAULDS COATINGS INC

6001 ANTOINE DR
HOUSTON, TX 77210-4806
US

Emergency Phone: 800-854-6813

Info Phone: 908-686-1300

Cage: 50411

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

SILICA GEL

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 5-10%

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

ALKYL GLYCIDYL ETHER

CAS: 68081-84-5

Fraction By Weight: 10-15%

OSHA PEL N/K

ACGIH TLV: N/K

BISPHENOL A-EPICHLOROHYDRIN COPOLYMER

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 70-75%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: IRRITATION MAY OCCUR.
SKIN: IRRITATING. MAY RESULT IN DERMATITIS. MAY CAUSE SENSITIZATION
OR OTHER ALLERGIC RESPONSES. INHALATION: MAY CAUSE IRRITATION.
INGESTION: MAY CAUSE GASTROINTESTI NAL IRRITATION. CHRONIC:NONE
SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES: FLUSH IMMED W/COPIOUS QTYS OF WATER FOR AT LEAST 15
MIN. GET MED ATTN IMMED. SKIN: REMOVE CONTAM CLTHG. WASH SKIN
W/PLENTY OF SOAP & WATER. LAUNDER CLOTHES BEFORE REUSE. INHAL:
REMOVE TO FRESH A IR. GET MED ATTN IMMED. INGEST: CALL MDIMMED TO
DETERMINE WHETHER OR NOT TO INDUCE VOMITING.

Flash Point Method:SCC
Flash Point:200F,93C
Extinguishing Media:USE FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SMOTHER FLAMES W/ONE OF THE ABOVE EXTING MEDIA. WATER MAY BE USED
TO COOL UNOPENED CONTRS, BUT (SUP DAT)
Unusual Fire/Explosion Hazard:NONE KNOWN UNLESS OTHERWISE NOTED.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN BUILDINGS DESIGNED AND
PROTECTED FOR STORAGE OF LIQUIDS WITH NFPA CLASS GIVEN BY OSHA
CLASS.
Other Precautions:AVOID BREATHING DUST OR CHIPS FROM SANDING OR
BLASTING SURFACES COATED WITH THIS PRODUCT.

Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF
OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT AREAS, USE
NIOSH/MSHA APPRVD RESP I/A/W 29 CFR 1910.134 TO (SUP DAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGS BELOW LIM SPECIFIED, & TO REMOVE (SUP DAT)
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR APPROP IMPERVIOUS PROTECTIVE CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: MUST NOT BE USED AS AN EXTING MEDIA. TAKE CARE TO PVNT
SPREAD OF BURNING LIQ W/WATER. CLSD CONTRS MAY EXPLODE WHEN EXPOSED
TO EXTREME HEAT. RESP PROT: REMOVE COMBINATION OF PARTICULAT ES &
VAPS. VENT: DECOMP PROD DURING WELDING/FLAME CUTTING ON SURF COATED
W/THIS PROD.

Boiling Pt:B.P. Text:482F,250C
Vapor Density:HVR/AIR
Spec Gravity:1.17
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:0 (WT)

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBON FRAGMENTS, ALDEHYDES.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.